MoFlyeer Motorcycle USB Charger Aluminum Alloy Waterproof Mobile Phone Adapter 2.4A Digital Display Car Fast Charger with Switch

Specifications:

Name: USB Charger Socket

Net weight: about 165G

Gross weight: about 220G

Material: Nylon flame retardant environmental protection material and aluminum alloy

Wire length: wire length: about 130cm/51.18in; Extension line wire length: about 22cm/8.66in

Input voltage: DC12V

Output voltage: 5V

Output current: 2.4A

Color: black and silver (optional)

Voltage meter color: red

Working temperature: -20 ℃ – 80 ℃

Voltage meter detection range: 6-38V

Installation Aperture: Install and use for 22mm/0.87inch diameter

Installation scope: Suitable for 12V travel tools such as motorcycles, ATVs, etc.

Use: The charger can charge mobile phones, tablets, navigation, GPS, etc. At the same time, it can detect the battery voltage at any time to ensure the safety of the battery.

Wiring instructions: The red wire is connected to the positive pole of the power supply, and the black wire is connected to the negative pole of the power

Product advantages：

1. The input voltage of the product is 12-24V, which is very wide;

2. The product is equipped with 2.4A charging port, which can be used for power supply of mobile phone, tablet, GPS, etc.

3. The product has a voltmeter, which can detect the use of the battery at any time to prevent safety accidents caused by poor battery;

4. Independent switch can control USB and voltmeter at the same time, ready to use;

5. Aluminum alloy casing, red digital voltmeter, plus fine workmanship, the whole product looks high-end atmosphere.

Note: 

1.Transition: 1cm=10mm=0.39inch

2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.

3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!