TED 72*72mm Ok J PT100 Sort AC220V 110V 24V 380V Knob 0-100 300 400 600 Diploma Digital Thermostat Powered Temperature Controller

Describtion

1. All the controller collection is AC 24V/ 220V/ 110V/ 380V, single enter ,we will choose Ok/ J/ PT100 after we place the order.

2. Controller is one relay output, the relay rated present is 5A,so if the laod energy greater than 1000W, we want add one AC contactor.

3. If want different requirement please contact us , our manufacturing facility manufacture controller greater than 20years.We will present technical assist and customised manufacturing of merchandise.

TED Instrument Guide

1. The meter kind have to be used with the sensor kind. For instance, the Ok kind can solely use the Ok kind sensor.
2. Frequent faults: show HHH – sensor harm / missed /Ok or E not match. The temperature doesn’t rise and fall when heater working or show LLL: sensor reverse connection / Ok or E not match.
3. Whether it is unclear which is fault between the sensor and the meter(E/Ok kind). We will brief the 1 and a pair of terminals, and the meter exhibits that the temperature is sort of the identical as the traditional temperature. It means the instrument is regular, the sensor (thermocouple) is damaged.
4. This methodology shouldn’t be relevant to the detection and judgment of CU50 and Pt100 thermal resistance kind meters.

Instrument description and wiring directions

6.7.8 Terminals are relay output terminals (passive output) 7 is a typical level and 6 is a usually closed level. 8 is a usually open level.no energy output. When the temperature doesn’t attain the set temperature,the panel inexperienced mild (ON) is on / 7 and eight terminals are closed (performed) :when the temperature reaches the set temperature or greater than the set temperature: the panel crimson (OFF) lights up / 7 and 6 twoTerminal pull-in (conduction)

The temperature distinction of the controller is 2 levels. When the usually open level is linked, the temperature rises to the set level and the contact open and the load cease heating. When the temperature falls under the set temperature by 2 levels, it closes and cargo begins to work.